Palax X1100 is a hydraulic splitter that splits 80 cm thick wood with a force up to 10 tons. Note: the machine suits for soft wood only.
The machine is suitable for both hobbyists and professionals, and especially when processing large-diameter logs alongside a firewood processor.
Palax X1100 is available either with tractor hydraulics or with its own hydraulics.
The machine has a 3-point linkage to a tractor.
Palax X1100 is a safe and efficient hydraulic splitter that meets the latest safety regulations.
The machine comes standard with a 2/4-part splitting blade and a hammer to facilitate log processing. Ergonomics is enhanced by the fact that the logs do not fall to the ground after splitting: the extension table is spacious and the firewood can be processed for stacking directly from the working height.
Below are more detailed information about the X1100 machine.
POWER SOURCE
PTO hydraulics
Own hydraulics
STANDARD IN X1100:
- Hydraulic log lifter
- Hydraulic height adjustment of the splitting wedge
- Sturdy and spacious extension table
- 2/4 splitting wedge
- Hammer
As an accessory, a 2/6-section splitting wedge is available.
X1100 product information
- Splitting power 10 tons
- Hydraulic log lifter
- Sturdy and spacious extension table: firewood can be processed for stacking directly from the working height
- 2/4 splitting wedge
- Hydraulic height adjustment of the splitting wedge
- The hydraulic oil tank of the model equipped with its own hydraulics is 40 liters, and its recommended yield is 400 r/min and 37 l/min
- 2/6-section splitting wedge is available as an accessory
- Dimensions of Palax X1100 in transport: height 1600 mm, length 2380 mm and width 1500 mm
Contact us
